Luminaire pole for plaza or apron lighting. Hot-dip galvanised, weather and corrosion resistant according to DIN EN ISO 1461. Hot-dip galvanised. Available in all RAL colours at an extra charge (powder-coated). Resistant to vandalism and environmental influences. With door 85 x 400 mm. For mounting two floodlights. Dimensions: h1 Length: 15600 mm h2 Ground level: 1500 mm Foundation depth: Approx. 1600 mm Upper mast end Ø: 108mm d2 Base Ø : 264 mm s Wall thickness: Approx. 4 mm The mast consists of two parts, which can be plugged together:* These masts are offered in different versions. The dimensions may vary.The masts are very bulky. Delivery can only be made by a special truck. The freight costs are therefore expensive. If you order several masts, delivery costs will only be charged once.If you order the luminaires from us, GEO-Technik will pay part of the transport costs for you.
Luminaire pole, resistant to vandalism and environmental influences.Hot-dip galvanised, weather and corrosion resistant according to DIN EN ISO 1461.Additionally painted in any RAL colour (powder-coated) at an extra charge.Steel pole according to DIN EN 40-4.With door 85 x 400 mm.For mounting a street light or lantern.With earthing connection.Dimensions:h1 visible length: 3000 mmh2 ground: 600 mmFoundation depth: Approx. 66cmPole top end Ø : 60 mmd2 Foot Ø : Approx. 112 mms Wall thickness: Approx. 2,6 mm* These masts are offered in different versions. The dimensions may vary.
Luminaire pole, resistant to vandalism and environmental influences.Hot-dip galvanised, weather and corrosion resistant according to DIN EN ISO 1461.Additionally painted in any RAL colour (powder-coated) at an extra charge.Steel pole S235 according to DIN EN 40-4.With door 85 x 400 mm.For mounting a webcam and a light.With earthing connection.Dimensions:h1 visible length: 5000 mmh2 ground: 800 mmFoundation depth: Approx. 90cmPole top end Ø : 76mmd2 base Ø : Approx. 114 mmWall thickness s: Approx. 3.0 mm* These masts are offered in different versions. The dimensions may vary.
Luminaire pole, resistant to vandalism and environmental influences.Hot-dip galvanised, weather and corrosion resistant according to DIN EN ISO 1461.Additionally painted in any RAL colour (powder-coated) at an extra charge.Steel pole S235 according to DIN EN 40-4.With door 85 x 400 mm.For mounting a floodlight or street light.With earthing connection.Dimensions:h1 visible length: 7000 mmh2 ground: 800 mmFoundation depth: Approx. 900 mmPole top Ø : 60mmd2 base Ø : Approx. 114 mmWall thickness s: Approx. 3 mm* These masts are offered in different versions. The dimensions may vary.The masts are very bulky. Delivery can only be made by a special truck. The freight costs are therefore expensive. If you order several masts, delivery costs will only be charged once.If you order the luminaires from us, GEO-Technik will pay part of the transport costs for you.
This attachment is slipped onto the top of the mast.Fixing with the enclosed Allen screws.Luminaire mount 60mmBracket length each: 400mm(arrangement 180°, other angles on request)For mast diameter 76mmAngle of inclination 15Material: hot-dip galvanised steelScrews stainless steel A2Powder coatings, as well as special sizes and other boom lengths available on request.Maximum weight per street light 15kg (higher weights on request).Cables can be pulled directly through the outriggers into the masts.A support guard is built in to prevent the cables from shearing off.
Width 120cmMaximum weight per spotlight 12kg (higher weights on request)With 4x hole 12mmSuitable for poles with top end Ø 76mmMaterial:SteelGalvanised (coated in any RAL colour at an extra charge)With VA screws for pole mountingResistant to vandalism and environmental influences.
2 headlamps can be mounted.Maximum weight per spotlight 12kg (higher weights on request).Total width 80cmWith lateral angles for wobble-free mounting of one floodlight each.Arrangement 180° (other angles on request)The angles have a central hole 13mm, as well as 2 x hole 10mm with 140mm spacing. Suitable for poles with spigot Ø 60mm or 76mm.Material:SteelGalvanised (coated in any RAL colour at an extra charge)With VA grub screws for fixing to the poleResistant to vandalism and environmental influences.
Width 120cmMaximum weight per spotlight 12kg (higher weights on request)With 2x hole 12mmSuitable for poles with top end Ø 76mmMaterial:SteelGalvanised (coated in any RAL colour at extra charge)With VA screws for pole mountingResistant to vandalism and environmental influences.
Slightly inclined upwards (15°) for angled radiation away from the building. Robust, hot-dip galvanised design from our own production. (Painting, special colour in Ral, as well as other angles and lengths possible on request). Ø 60 mm (other diameters possible as special order)Width 130mm, height 210mm, length of the socket 200mm4x hole for wall mounting 12mm (hole spacing 95x175mm)Cable feed-through in the middle with 25mm or below the pipe socket with 10mmFor street lights up to max. 25kg
Particularly stable mounting option of a street lamp.Mounting on a flat house wall.Material: welded steel galvanizedSlightly tilted upwards 15° for oblique radiation away from the building.Length: 1000mmDiameter: Ø 60 mm(Painting, special color upon request)
Optionally available for poles with 76mm, 98mm or 108mm braid diameterstable mast sleeve with corresponding hole pattern and cable entry into the mastincl. 4 fixing screws and 2 fixing screws in stainless steel for the sleeve and the flooderMaterial steel hot-dip galvanized.Maximum weight of headlamps: 50kg
This fastener is attached from above over the mast and at any heightfixed with the enclosed Inbus screws.Luminaire mounting 60mmBoom length: 200mmMaterial: hot-dip galvanized steelScrews stainless steel A2Powder coatings, as well as special sizes and other boom lengths available on request.There is 1 hole as a cable outlet at the lower end of the boom.
This fixture consists of 2 parts and is fixed to the side of the pole at any height.Luminaire mount 60mmBracket length: 200mmMaterial: hot-dip galvanised steelScrews stainless steel A2Inclination: approx. 10Powder coatings, special sizes and other bracket lengths available on request.There is 1 hole as cable outlet at the lower end of the bracket, as well as a hole in the clamp for direct cabling into the mast.
This fixture is slipped over the pole from above and fixed at any height with the enclosed Allen screws. Luminaire mount 60mmBracket length: 200mmMaterial: hot-dip galvanised steelScrews stainless steel A2Powder coatings, special sizes and other bracket lengths available on request.There are 2 holes as cable outlets at the lower end of the bracket.Infinitely adjustable inclination +- 90°.
Angle piece welded from steel.Angled by 15°.With 4 stainless steel screws for fixing.Hot-dip galvanised inside and outside.Powder-coated at extra charge.Total height approx. 300mmOutrigger 200mm
Boom length 100-150cmFor pole diameter 76 or 60 mmLuminaire mounting bracket 60mmAngle of inclination 15° (or according to customer requirements)Material: Hot-dip galvanised steel inside and outside.Powder coated at extra charge.With VA screws
Attaches to a 60mm luminaire pole and increases the light point height by 100cmExtension welded from steelspigot diameter 60mm (luminaire holder)Material: Hot-dip galvanised steel inside and outside.Powder coated at extra charge.With 6 stainless steel Allen screws for fixing.Also available as a raised pole mount adapter with 25cm bracket.Please note the increased load on the existing mast in windy conditions.Please have the stability of the existing mast checked by a structural engineer.A maximum of only one mast extension should be used.Minimum order quantity: 2 pcs.
Attaches to a 76mm luminaire pole and increases the light point height by 100cmExtension welded from steelspigot diameter 76mm (luminaire holder)Material: Hot-dip galvanised steel inside and outside.Powder coated at extra charge.With 6 stainless steel Allen screws for fixing.Also available as a raised pole mount adapter with 25cm bracket.Please note the increased load on the existing mast in windy conditions.Please have the stability of the existing mast checked by a structural engineer.A maximum of only one mast extension should be used.Minimum order quantity: 2 pcs.
Attaches to a 76mm luminaire pole and increases the light point height by 100cmExtension welded from steelspigot diameter 76mm (luminaire holder)Material: Hot-dip galvanised steel inside and outside.Powder coated at extra charge.With 6 stainless steel Allen screws for fixing.Also available as a raised pole mount adapter with 25cm bracket.Please note the increased load on the existing mast in windy conditions.Please have the stability of the existing mast checked by a structural engineer.A maximum of only one mast extension should be used.Minimum order quantity: 2 pcs.
Application: Fixing of street lights to existing concrete poles.Attachment piece in 8-edge formOuter diameter: 150mmInner diameter: 130mm with welded plateFixing: with 8 stainless steel headless pins M6Tube length: 80cmTop diameter: 76mm (luminaire holder)Wall thickness: 2,6mmLoad according to DIN EN 40: 0.5m² and 25kg at the top of the pole (without considering the statics of the concrete pole).Material: steel, hot-dip galvanised
