With highly efficient SMD LEDs. Replaces a double fluorescent tube 18W T8 and is much brighter. Housing and cover made of impact-resistant polycarbonate. For wall or ceiling surface mounting. Flicker-free, bright light with low energy consumption - only approx. 50% compared to T8 fluorescent tubes. With 1 cable gland. Prepared for through-wiring. Light colour: 4000K natural white Light distribution 120° wide Luminous flux: 2200 Lm CRI: 80 - 89 Operating voltage: 230V AC Power consumption: 20W Harmonic distortion THD < 3% Temperature range: -20°C to + 55°C Average life: 50000 h Material: High quality PC UV stabilised Protection class: IP69K Underwater operation possible Impact resistance: IK10 Dimensions: L 600 mm, W 72 mm, H 63 mm
With highly efficient SMD LEDs. Replaces a fluorescent tube 58W T8 and is much brighter. Housing and cover made of impact-resistant polycarbonate. For wall or ceiling surface mounting. Flicker-free, bright light with low energy consumption - only approx. 50% compared to T8 fluorescent tubes. With 3 meters long cable. Light colour: 4000K natural white (on order also 3000K, 5000K or 6000K) Light distribution 120° wide Luminous flux: 2950 Lm Colour rendering: CRI 80 - 89 (of 100) Operating voltage: 12 - 24V DC (10V - 28V) - not for line voltage ! Power consumption: 25W Harmonic distortion THD < 3% Temperature range: -20°C to + 50°C Average life: 50000 h Material: High quality PC UV stabilised Protection class: IP65 Length: L 1500 mm (on order also 600mm or 1200mm) Diameter: 28 mm
Powerful LED lamp as replacement against fluorescent tubes - bright LED tube.Very bright by high flux SMD LED.Advantages of LED tube lamps against the old fluorescent tubes: Low power consumption, very long life time, high brightness, contains no toxic elements. LED tubes are maintenance free, wich results in a fast amortisation. This tube replaces a fluorescent tube TL 10W T5 Rated life: 25000 h - more than 11 years. Luminous flux: 600 lm Light colour: 4000K pure white 840 ( at 50 pcs. on request with 3000K warm white or 6500K daylight) Wide beam spread: 160° Matted diffusor (on request in clear available) Operating voltage: 12V and 24V DC (10V - 28V) - not for mains voltage ! The electrical connection is made at one end of the tube. The other end is bridged. Reverse polarity protected: +- can be reversed Power: 5 watt Easy exchange at lighting fixtures with magnetic ballast. Only the ignitor has to be removed. Than the old tube has to be taken out and replaced by the new LED tube.Not suitable for fixtures with electronic ballast !Socket: T8, G13 - like standard fluorescent tubes. Material: aluminium / polycarbonate Diameter: 22 mm Standards: TÜV, CE, EMC, ETL, SAA, GS, FCC und RoHS, CEI, EN 55015:2013, EN 61000-3-2:2014, EN 61000-3-3:2013, EN 61547:2009, EN 62776:2015, EN 62471:2008, EN 62493:2015, EN 45545 ( R24) fire protection Sale to trade or industry only. Installation may only be carried out by a qualified electrician.
Powerful LED lamp as replacement against fluorescent tubes - bright LED tube.Very bright by high flux SMD LED.Advantages of LED tube lamps against the old fluorescent tubes: Low power consumption, very long life time, high brightness, contains no toxic elements.LED tubes are maintenance free, wich results in a fast amortisation.This tube replaces a fluorescent tube TL 36W T8Rated life: 30000 h - more than 20 years.Luminous flux: 2160 lmLight colour: 4000K pure white ( at 50 pcs. on request with 3000K warm white or 6500K daylight)Wide beam spread: 160°Matted diffusor (on request in clear available)Operating voltage: 12V and 24V DC (10V - 28V) - not for mains voltage !The electrical connection is made at one end of the tube. The other end is bridged.Reverse polarity protected: +- can be reversedPower: 18 wattEasy exchange at lighting fixtures with magnetic ballast.Only the ignitor has to be removed. Than the old tube has to be taken out and replaced by the new LED tube.Not suitable for fixtures with electronic ballast !Socket: T8, G13 - like standard fluorescent tubes.Material: Glass / aluminiumLength: 1200 mmDiameter: 28 mmStandards: TÜV, CE, EMC, ETL, SAA, GS, FCC und RoHS, CEI, EN 55015:2013, EN 61000-3-2:2014, EN 61000-3-3:2013, EN 61547:2009, EN 62776:2015, EN 62471:2008, EN 62493:2015Sale to trade or industry only. Installation may only be carried out by a qualified electrician.
Lichtstarke LED Lampe als Leuchtstoffröhren-Ersatz mit hoher Effizienz.Diese helle LED Leuchtröhre erzielt die gleiche Helligkeit, wie die bisherigen T8 Leuchtstoffröhren.Vorteile der LED Röhrenlampen gegenüber den alten Leuchtstoffröhren sind der niedrige Stromverbrauch,sehr lange Brenndauer, hohe Lichtausbeute und die Tatsache, dass bei der Produktion der LED Leuchtstoffröhre keine giftigen und umweltschädlichen Gase, wie Quecksilberdampf, benötigt werden. LED Röhren sind auch praktisch wartungsfrei, wodurch Amortisationskosten und Wartungskosten sinken.LED Röhre 60cm ersetzt TL 18W T8 740 oder 840Schneller Austausch bei Leuchten mit magnetischem Vorschaltgerät (KVG oder VVG).Nur der Starter muss durch eine Starterbrücke ersetzt werden, dann die LED-Röhre einfach statt der alten Leuchtröhre einsetzen.Nicht geeignet für Leuchten mit EVG oder Leuchten in Tandem-Schaltung !Der Einbau sollte nur durch einen Elektro-Fachmann erfolgen.Lebensdauer: 26000 Std. - entspricht etwa 11 Jahre, in denen Sie viel Strom sparen und keinen Lampenwechsel durchführen müssen.Jährliche Stromkostenersparnis 52,6 kW bei 12 Std. tägl./ 0,16 Eur = 8,41 Euro pro RöhreLichtstrom: 1000 lmLichtfarbe: 4500K weiß (auf Sonderbestellung ab 10 Stk. auch 3000K warmweiß oder 6000K Tageslicht)Breiter Abstrahlwinkel: 125°Betriebsspannung: 185V - 240V ACLeistungsaufnahme: 9 WattSockel: T8, G13 - wie handelsübliche LeuchtstofflampenLänge: 600mm Material: Aluminium und Polycarbonat mattiertZulassungen: TÜV, CE, EMC und RoHS, CEI EN 62776
Bright LED lamp as a fluorescent tube replacement with high efficiency. This bright LED tube achieves the same brightness as the previous T8 fluorescent tubes. Advantages of LED tube lamps compared to the old fluorescent tubes are the low power consumption, very long burning time, high luminous efficacy and the fact that no toxic and environmentally harmful gases, such as mercury vapour, are needed in the production of the LED fluorescent tube. LED tubes are also virtually maintenance-free, which reduces amortisation costs and maintenance costs.About 8.5 years, during which you save a lot of electricity and do not need to change lamps. Annual electricity cost saving 96kW at 12 hrs. daily / 0,16 Eur = 15,42 Euro per tube. LED tube 120cm ( 342 LED) replaces TL 36W T8, Luminous flux: 2160 lm Light colour: 4000K white 840 (on special order from 5 pcs. also 6000K daylight) Wide beam angle: 180 deg Lifetime 35000 hrs Tube: Frosted (on special request also available clear) Operating voltage: 85V - 265V AC Frequenz: 50Hz ... 100Hz Power consumption: 18 Watt Base: T8, G13 - like standard fluorescent lamps Material: aluminium / polycarbonate Diameter: 28 mm Approvals: TÜV, CE, EMC and RoHS, CEI EN 62776, EN 45545 ( R24) fire protection Quick replacement for luminaires with magnetic ballast (CCG or CCG). Only the starter has to be replaced by a starter bridge, then simply insert the LED tube instead of the old fluorescent tube.If there is an ECG in the luminaire, it must be disconnected. Installation should only be carried out by a qualified electrician. LED fluorescent tubes can only be shipped as bulky goods - the surcharge is 17 euros once or by collection.
Bright LED lamp as a fluorescent tube replacement with high efficiency. This bright LED tube achieves the same brightness as the previous T8 fluorescent tubes.Advantages of LED tube lamps compared to the old fluorescent tubes are the low power consumption, very long burning time, high luminous efficacy and the fact that no toxic and environmentally harmful gases, such as mercury vapour, are needed in the production of the LED fluorescent tube.LED tubes are also practically maintenance-free, which reduces amortisation costs and maintenance costs.LED tube 60cm replaces TL 18W T8 740 or 840Quick replacement for luminaires with magnetic ballast (CCG or CCG). Only the starter has to be replaced by a starter bridge, then simply insert the LED tube instead of the old fluorescent tube.Not suitable for luminaires with ECG or luminaires in tandem circuit ! Installation should only be carried out by a qualified electrician. Lifetime: 26000 hours - corresponds to about 11 years, during which you save a lot of electricity and do not have to change lamps. Annual electricity cost saving 52.6 kW at 12 hrs. daily / 0.16 Eur = 8.41 Euro per tubeLuminous flux: 1250 lmLight colour: 4500K white (on special order from 10 pcs. also 3000K warm white)Wide beam angle: 180 degOperating voltage: 120V - 240V ACPower consumption: 10 WattBase: T8, G13 - like standard fluorescent lampsLength: 600mm Material: Frosted glassApprovals: TÜV, CE, EMC and RoHS, CEI EN 62776
Light-intensive LED lamp as a fluorescent tube replacement with high efficiency.This super-bright LED tube achieves a greater brightness than the previous T8 fluorescent tubes.Advantages of LED tube lamps compared to the old fluorescent tubes are the low power consumption, very long burning time, high luminous efficacy and the fact that no toxic and environmentally harmful substances, such as mercury, are needed in the production of the LED fluorescent tube. LED tubes are also practically maintenance-free, which reduces amortisation costs and maintenance costs.LED tube 1500mm replaces TL 58W T8,Easy replacement of luminaires with magnetic ballast ( VVG or KVG ).With the old luminaire, only the starter has to be replaced by the starter bridge supplied !With integrated IR sensor, range 5-8 metres. Illumination only when a person is present, for approx. 1 minute.Lifetime: 50000 hrs. - corresponds to about 20 years, during which you save a lot of electricity and do not have to change lamps.Annual electricity cost savings approx. 90%.Luminous flux: 2800 lmLight colour: 4000K white (on special order also 6000K daylight or 3000K warm tone)Colour rendering index Ra: > 85Wide beam angle: 180 degTube surface milkyOperating voltage: 85V - 260V ACPower consumption: 24WAmbient temperature: -25°C to 50°CBase: T8, G13 - like standard fluorescent lampsMaterial: Aluminium and polycarbonateApprovals: TÜV, CE and RoHSMinimum order quantity: 25 pcs.LED fluorescent tubes can only be shipped as bulky goods - the surcharge is 29,75 Euro or by collection.
Lichtstarke LED Lampe als Leuchtstoffröhren-Ersatz mit hoher Effizienz. Diese superhelle LED Leuchtröhre erzielt eine größere Helligkeit, als die bisherigen T8 Leuchtstoffröhren.Vorteile der LED Röhrenlampen gegenüber den alten Leuchtstoffröhren sind der niedrige Stromverbrauch, sehr lange Brenndauer, hohe Lichtausbeute und die Tatsache, dass bei der Produktion der LED Leuchtstoffröhre keine giftigen und umweltschädlichen Stoffe, wie Quecksilber, benötigt werden. LED Röhren sind auch praktisch wartungsfrei, wodurch Amortisationskosten und Wartungskosten sinken.Etwa 8,5 Jahre, in denen Sie viel Strom sparen und keinen Lampenwechsel durchführen müssen. Jährliche Stromkostenersparnis 178,7kW bei 12 Std. tägl./ 0,16 Eur = 28,59 Euro pro RöhreLED Röhre 1500mm (432 LED) ersetzt TL 58W T8, Lichtstrom: 2200 lm Lichtfarbe: 4500K weiß (auf Sonderbestellung ab 5 Stk. auch 6000K Tageslicht) Breiter Abstrahlwinkel: 125° Lebensdauer 26000 Std Röhre: mattiertBetriebsspannung: 85V - 230V AC Leistungsaufnahme: 18,3 Watt Sockel: T8, G13 - wie handelsübliche Leuchtstofflampen Material: Aluminium und Glas Zulassungen: TÜV, CE, EMC und RoHS, CEI EN 62776 Problemloser Austausch bei Leuchten mit magnetischem Vorschaltgerät (KVG oder VVG). Nur der Starter muss durch eine Starterbrücke ersetzt werden, dann die LED-Röhre einfach statt der alten Leuchtröhre einsetzen.Der Einbau sollte nur durch einen Elektro-Fachmann erfolgen. Nicht geeignet für Leuchten mit EVG !LED Leuchtstoffröhren können nur als Sperrgut versendet werden - Der Aufpreis beträgt einmalig 17 Euro oder durch Abholung.
Lichtstarke LED Lampe als Leuchtstoffröhren-Ersatz mit hoher Effizienz.Diese superhelle LED Leuchtröhre erzielt eine größere Helligkeit, als die bisherigen T8 Leuchtstoffröhren.Vorteile der LED Röhrenlampen gegenüber den alten Leuchtstoffröhren sind der niedrige Stromverbrauch, sehr lange Brenndauer, hohe Lichtausbeute und die Tatsache, dass bei der Produktion der LED Leuchtstoffröhre keine giftigen und umweltschädlichen Stoffe, wie Quecksilber, benötigt werden. LED Röhren sind auch praktisch wartungsfrei, wodurch Amortisationskosten und Wartungskosten sinken.Problemloser Austausch bei Leuchten mit elektronischem Vorschaltgerät ( EVG, VVG oder KVG ).An der Leuchte oder am EVG Vorschaltgerät muß nichts verändert werden.Bei alten Leuchten mit magnetischem Vorschaltgerät, muß der Starter durch die mitgelieferte Starter-Brücke ersetzt werden !LED Röhre 1500mm (432 LED) ersetzt TL 58W T8,Lebensdauer: 50000 Std. - entspricht etwa 20 Jahre, in denen Sie viel Strom sparen und keinen Lampenwechsel durchführen müssen.Jährliche Stromkostenersparnis 178,7kW bei 12 Std. tägl./ 0,16 Eur = 28,59 Euro pro RöhreLichtstrom: 3000 lmLichtfarbe: 4500K weiß (auf Sonderbestellung auch 6000K Tageslicht oder 3000K Warmton)Farbwiedergabeindex Ra: > 85Breiter Abstrahlwinkel: 125°Standardausführung mattiertBetriebsspannung: 85V - 260V ACLeistungsaufnahme: 23 WattUmgebungstemperatur: -25°C bis 55°CSockel: T8, G13 - wie handelsübliche LeuchtstofflampenMaterial: Aluminium und PolycarbonatZulassungen: TÜV, CE und RoHSMindest-Bestellmenge: 25 Stk.LED Leuchtstoffröhren können nur als Sperrgut versendet werden - Der Aufpreis beträgt einmalig 29,75 Euro oder durch Abholung.
Lichtstarke LED Lampe als Leuchtstoffröhren-Ersatz mit hoher Effizienz.Diese helle LED Leuchtröhre erzielt die gleiche Helligkeit, wie die bisherigen T8 Leuchtstoffröhren.Lichtstark durch breitstrahlende Power LED.Vorteile der LED Röhrenlampen gegenüber den alten Leuchtstoffröhren sind der niedrige Stromverbrauch, sehr lange Brenndauer, hohe Lichtausbeute und die Tatsache, dass bei der Produktion der LED Leuchtstoffröhre keine giftigen und umweltschädlichen Gase, wie Quecksilberdampf, benötigt werden. LED Röhren sind auch praktisch wartungsfrei, wodurch Amortisationskosten und Wartungskosten sinken.Jährliche Stromkostenersparnis 96kW bei 12 Std. tägl./ 0,16 Eur = 15,42 Euro pro RöhreLED Röhre 120cm ( 342 LED) ersetzt TL 36W T8,Lebensdauer: 25000 Std. - entspricht etwa 8,5 Jahre, in denen Sie viel Strom sparen und keinen Lampenwechsel durchführen müssen.Lichtstrom: 1900 lmLichtfarbe: 4500K weiß (auf Sonderbestellung ab 5 Stk. auch 6000K Tageslicht)Breiter Abstrahlwinkel: 125°Standardausführung mattiert (auf Sonderwunsch auch klar lieferbar)Betriebsspannung: 85V - 230V ACLeistungsverbrauch: 18 WattTemperaturbereich: -30°C bis + 35°CSockel: T8, G13 - wie handelsübliche LeuchtstofflampenMaterial: Aluminium und Polycarbonat.Die Röhre hat TÜV, CE, EMC und RoHS Zulassung.
Schneller Austausch bei Leuchten mit magnetischem Vorschaltgerät (KVG oder VVG).Nur der Starter muss durch eine Starterbrücke ersetzt werden, dann die LED-Röhre einfach statt der alten Leuchtröhre einsetzen.Der Einbau sollte nur durch einen Elektro-Fachmann erfolgen.Nicht geeignet für Leuchten mit EVG !