Go to homepage

Innovative Accessories for Light Poles – Smart Top Pieces for Modern Lighting

Filter products

–
Post Bracket for two Street Lights 76/ 60mm
Post Bracket for two Street Lights 76/ 60mm
LS-ZM190
This attachment is slipped onto the top of the mast.Fixing with the enclosed Allen screws.Luminaire mount 60mmBracket length each: 400mm(arrangement 180°, other angles on request)For mast diameter 76mmAngle of inclination 15Material: hot-dip galvanised steelScrews stainless steel A2Powder coatings, as well as special sizes and other boom lengths available on request.Maximum weight per street light 15kg (higher weights on request).Cables can be pulled directly through the outriggers into the masts.A support guard is built in to prevent the cables from shearing off.

From €132.00*
* Prices excl. VAT plus shipping costs
Details
T-Bar 100cm to mount 4 Floodlights on a Steel Pole
T-Bar 100cm to mount 4 Floodlights on a Steel Pole
LS-ZM19
Width 120cmMaximum weight per spotlight 12kg (higher weights on request)With 4x hole 12mmSuitable for poles with top end Ø 76mmMaterial:SteelGalvanised (coated in any RAL colour at an extra charge)With VA screws for pole mountingResistant to vandalism and environmental influences.

From €105.00*
* Prices excl. VAT plus shipping costs
Details
T-Bar to Mount 2 Floodlights on a Street Pole
T-Bar to Mount 2 Floodlights on a Street Pole
LS-ZM19F
2 headlamps can be mounted.Maximum weight per spotlight 12kg (higher weights on request).Total width 80cmWith lateral angles for wobble-free mounting of one floodlight each.Arrangement 180° (other angles on request)The angles have a central hole 13mm, as well as 2 x hole 10mm with 140mm spacing. Suitable for poles with spigot Ø 60mm or 76mm.Material:SteelGalvanised (coated in any RAL colour at an extra charge)With VA grub screws for fixing to the poleResistant to vandalism and environmental influences.

From €124.00*
* Prices excl. VAT plus shipping costs
Details
T-Bar to Mount 2 Floodlights adjustable on a Steel Pole
T-Bar to Mount 2 Floodlights adjustable on a Steel Pole
LS-ZM194R
Width 120cmMaximum weight per spotlight 12kg (higher weights on request)With 2x hole 12mmSuitable for poles with top end Ø 76mmMaterial:SteelGalvanised (coated in any RAL colour at extra charge)With VA screws for pole mountingResistant to vandalism and environmental influences.

€214.00*
* Prices excl. VAT plus shipping costs
Wall Mount Bracket for Street Lights 60mm
Wall Mount Bracket for Street Lights 60mm
LS-ZM60
Slightly inclined upwards (15°) for angled radiation away from the building. Robust, hot-dip galvanised design from our own production. (Painting, special colour in Ral, as well as other angles and lengths possible on request). Ø 60 mm (other diameters possible as special order)Width 130mm, height 210mm, length of the socket 200mm4x hole for wall mounting 12mm (hole spacing 95x175mm)Cable feed-through in the middle with 25mm or below the pipe socket with 10mmFor street lights up to max. 25kg

From €33.00*
* Prices excl. VAT plus shipping costs
Details
Wall Mount Bracket 100cm long, for Street Light
Wall Mount Bracket 100cm long, for Street Light
LS-ZM604
Particularly stable mounting option of a street lamp.Mounting on a flat house wall.Material: welded steel galvanizedSlightly tilted upwards 15° for oblique radiation away from the building.Length: 1000mmDiameter: Ø 60 mm(Painting, special color upon request)

From €104.00*
* Prices excl. VAT plus shipping costs
Details
Pole bracket 60-76mm for light fixtures
Pole bracket 60-76mm for light fixtures
LS-ZM61
Suitable for poles from 60mm - 76mm Ømax. Support surface bracket 250x50mmHole spacing bracket: M8 90mm/ 140mm, M10 175mm / 230mmMax. Floodlight weight: 25 KgMaterial: hot-dip galvanised steel

From €37.48*
* Prices excl. VAT plus shipping costs
Details
Pole mount bracket 60mm for light fixtures
Pole mount bracket 60mm for light fixtures
LS-ZM611
Mounting plate 120 x 70mm for flooders.Incl. 2x tube bracket for 60mm mast and 2 holes 9 mm (spacing 70mm) for spotlights.

€25.00*
* Prices excl. VAT plus shipping costs
Mast attachment for large floodlight
Mast attachment for large floodlight
LS-ZM615-2
Optionally available for poles with 76mm, 98mm or 108mm braid diameterstable mast sleeve with corresponding hole pattern and cable entry into the mastincl. 4 fixing screws and 2 fixing screws in stainless steel for the sleeve and the flooderMaterial steel hot-dip galvanized.Maximum weight of headlamps: 50kg

From €108.00*
* Prices excl. VAT plus shipping costs
Details
Pole Mounting Arm 76mm round, for Street Light
Pole Mounting Arm 76mm round, for Street Light
LS-ZM618
This fastener is attached from above over the mast and at any heightfixed with the enclosed Inbus screws.Luminaire mounting 60mmBoom length: 200mmMaterial: hot-dip galvanized steelScrews stainless steel A2Powder coatings, as well as special sizes and other boom lengths available on request.There is 1 hole as a cable outlet at the lower end of the boom.

From €47.00*
* Prices excl. VAT plus shipping costs
Details
Pole Mounting Arm with bracket 76mm, for Street Light
Pole Mounting Arm with bracket 76mm, for Street Light
LS-ZM619
This fixture consists of 2 parts and is fixed to the side of the pole at any height.Luminaire mount 60mmBracket length: 200mmMaterial: hot-dip galvanised steelScrews stainless steel A2Inclination: approx. 10Powder coatings, special sizes and other bracket lengths available on request.There is 1 hole as cable outlet at the lower end of the bracket, as well as a hole in the clamp for direct cabling into the mast.

From €78.00*
* Prices excl. VAT plus shipping costs
Details
Adjustable Pole Mounting bracket 60mm round, for Street Light
Adjustable Pole Mounting bracket 60mm round, for Street Light
LS-ZM630
This fixture is slipped over the pole from above and fixed at any height with the enclosed Allen screws. Luminaire mount 60mmBracket length: 200mmMaterial: hot-dip galvanised steelScrews stainless steel A2Powder coatings, special sizes and other bracket lengths available on request.There are 2 holes as cable outlets at the lower end of the bracket.Infinitely adjustable inclination +- 90°.

€74.00*
* Prices excl. VAT plus shipping costs
Wall Mount clamp for steel pole 115mm
Wall Mount clamp for steel pole 115mm
LS-ZM660
Clamp 110 - 116mm.with 2 holes 9 mmGalvanised steel

€26.00*
* Prices excl. VAT plus shipping costs
Knee Corner Adaptor for Lighting Pole 60mm / 50mm
Knee Corner Adaptor for Lighting Pole 60mm / 50mm
LS-ZM92
Angle piece welded from steel.Angled by 15°.With 4 stainless steel screws for fixing.Hot-dip galvanised inside and outside.Powder-coated at extra charge.Total height approx. 300mmOutrigger 200mm

From €57.00*
* Prices excl. VAT plus shipping costs
Details
Side Arm 1m for Street Light Pole
Side Arm 1m for Street Light Pole
LS-ZM92A
Boom length 100-150cmFor pole diameter 76 or 60 mmLuminaire mounting bracket 60mmAngle of inclination 15° (or according to customer requirements)Material: Hot-dip galvanised steel inside and outside.Powder coated at extra charge.With VA screws

From €126.00*
* Prices excl. VAT plus shipping costs
Details
Extension 2m for Lighting Pole 60mm
Extension 2m for Lighting Pole 60mm
LS-ZM930
Attaches to a 60mm luminaire pole and increases the light point height by 100cmExtension welded from steelspigot diameter 60mm (luminaire holder)Material: Hot-dip galvanised steel inside and outside.Powder coated at extra charge.With 6 stainless steel Allen screws for fixing.Also available as a raised pole mount adapter with 25cm bracket.Please note the increased load on the existing mast in windy conditions.Please have the stability of the existing mast checked by a structural engineer.A maximum of only one mast extension should be used.Minimum order quantity: 2 pcs.

€126.00*
* Prices excl. VAT plus shipping costs
Extension 1m for Lighting Pole 76mm > 76mm
Extension 1m for Lighting Pole 76mm > 76mm
LS-ZM93VW
Attaches to a 76mm luminaire pole and increases the light point height by 100cmExtension welded from steelspigot diameter 76mm (luminaire holder)Material: Hot-dip galvanised steel inside and outside.Powder coated at extra charge.With 6 stainless steel Allen screws for fixing.Also available as a raised pole mount adapter with 25cm bracket.Please note the increased load on the existing mast in windy conditions.Please have the stability of the existing mast checked by a structural engineer.A maximum of only one mast extension should be used.Minimum order quantity: 2 pcs.

From €125.00*
* Prices excl. VAT plus shipping costs
Details
Extension 2m for Lighting Pole 76mm > 76mm
Extension 2m for Lighting Pole 76mm > 76mm
LS-ZM93V
Attaches to a 76mm luminaire pole and increases the light point height by 100cmExtension welded from steelspigot diameter 76mm (luminaire holder)Material: Hot-dip galvanised steel inside and outside.Powder coated at extra charge.With 6 stainless steel Allen screws for fixing.Also available as a raised pole mount adapter with 25cm bracket.Please note the increased load on the existing mast in windy conditions.Please have the stability of the existing mast checked by a structural engineer.A maximum of only one mast extension should be used.Minimum order quantity: 2 pcs.

From €91.00*
* Prices excl. VAT plus shipping costs
Details
Pole Adaptor for Concrete Mast 130mm
Pole Adaptor for Concrete Mast 130mm
LS-ZM937-8076
Application: Fixing of street lights to existing concrete poles.Attachment piece in 8-edge formOuter diameter: 150mmInner diameter: 130mm with welded plateFixing: with 8 stainless steel headless pins M6Tube length: 80cmTop diameter: 76mm (luminaire holder)Wall thickness: 2,6mmLoad according to DIN EN 40: 0.5m² and 25kg at the top of the pole (without considering the statics of the concrete pole).Material: steel, hot-dip galvanised

€200.00*
* Prices excl. VAT plus shipping costs
Adaptor 42mm Pole / 60mm Fixture
Adaptor 42mm Pole / 60mm Fixture
LS-ZM94
Intermediate piece welded from steel.With 4 stainless steel screws for fixing.Surface hot-dip galvanised.Dimensions:Length pole sleeve 70mmAttachment 150mm

€35.00*
* Prices excl. VAT plus shipping costs
Adaptor 42mm Pole / 60mm Fixture
Adaptor 42mm Pole / 60mm Fixture
LS-ZM94E
Intermediate piece welded from steel.With 4 stainless steel screws for fixing.Surface hot-dip galvanised.Dimensions:Length pole sleeve 70mmAttachment 150mm

From €35.00*
* Prices excl. VAT plus shipping costs
Details
Pole Adaptor 60mm to 1 1/4 Inch
LS-ZM946
Intermediate piece welded from steel. With 4 stainless steel screws for fixing. Surface hot-dip galvanised.Powder-coated at extra charge.

€38.00*
* Prices excl. VAT plus shipping costs
Pole Adaptor 60mm to 1 1/4 Inch
Pole Adaptor 60mm to 1 1/4 Inch
LS-ZM94R
Intermediate piece welded from steel. With 4 stainless steel screws for fixing. Surface hot-dip galvanised.Powder-coated at extra charge.

From €38.00*
* Prices excl. VAT plus shipping costs
Details
Adaptor 76mm Pole to 50mm Fixture
LS-ZM947
Intermediate piece welded from steel.With 4 stainless steel screws for fixing.Surface hot-dip galvanised.Powder coated at extra charge.Total length 245mm

€41.00*
* Prices excl. VAT plus shipping costs

Flexible and Efficient Control Components for Optimal Light Management Solutions

Innovative Control Components for Optimal Lighting Systems

Our top pieces enable modern electrical installations specifically designed for light poles. With precise fuse boxes, powerful switch solutions, and advanced motion sensors, these components integrate seamlessly into existing systems and provide automated, energy-efficient lighting control in demanding outdoor environments.

Safety and Comfort through Smart Solutions

By using robust timers and innovative motion detectors, our top pieces not only increase operational safety but also enhance user convenience. These intelligent control components ensure demand-oriented and reliable lighting that optimally supports both public and private installations while meeting the highest safety standards.

Custom Connection Solutions for Efficient Project Integration

Our tailor-made top pieces offer flexible connection options that integrate ideally into various light management systems. With high compatibility and easy installation, these components enable seamless project optimization, meeting the specific requirements of modern outdoor lighting – from large-scale municipal projects to custom private solutions.

This website uses cookies to ensure the best experience possible. More information...