LED Street Light Lamp E40 Retrofit 28W
Product number:
Z-LED-E40R28-4
Product information "LED Street Light Lamp E40 Retrofit 28W"
Bright, energy-saving LED lamp. Directional light, even with old, matt reflectors in the existing luminaire.Easy conversion of street lighting from 80W HQL HPL or 50W sodium vapour to LED.Solid aluminium heat sink for long service life.
Retrofit older street lights with mercury vapour lamps, such as HPL, HQL, HRL or HSL:
Remove the old lamp centre and then screw this retrofit lamp into the street lighting.
The old ballast (choke) can remain in the luminaire.
The new LED lamp can be operated with or without ballast.
Important: If there is an igniter / starter in the old lamp, it must be removed beforehand.
This bright LED lamp consists of an effective aluminium heat sink, which keeps the operating temperature particularly low.
This prolongs the life of the lamp considerably.
The reflector in the old lamp is not used, only the directly emitted light of the LEDs.
This results in less light loss and higher luminous efficacy on the road.
After screwing in the economical LED lamp, it can still be adjusted so that it radiates evenly in the desired direction.
Energy saving, considerably longer durability and savings in maintenance costs.
LED chip: 28 x 1W High Power LEDs
Brightness: 2670 lumen (equivalent to 50W NAT lamp at 6m pole height or 80W HQL / HPL lamp at 7m pole height)
Average luminous intensity 13 lux at 6m height.
Light distribution: Horizontal axis: 120°, vertical axis: 60°.
Base type: E40
Light colour: 3000K (warm white) or 4000K (neutral white)
Light output ratio: 95 Lm/W
Service life: Approx. 40,000 h = approx. 10 years
Power consumption: max. 29 Watt (LEDs: 28 Watt)
Voltage: 85 - 265VAC (universal) 50Hz - 60Hz
Dimensions: Length 275 mm, Ø 92 mm
Rotatable: 360° (after screwing into the socket)
Housing: aluminium profile heat sink, PC
Protection class: IP54
For professional use only
Minimum order quantity: 2 pieces
Remove the old lamp centre and then screw this retrofit lamp into the street lighting.
The old ballast (choke) can remain in the luminaire.
The new LED lamp can be operated with or without ballast.
Important: If there is an igniter / starter in the old lamp, it must be removed beforehand.
This bright LED lamp consists of an effective aluminium heat sink, which keeps the operating temperature particularly low.
This prolongs the life of the lamp considerably.
The reflector in the old lamp is not used, only the directly emitted light of the LEDs.
This results in less light loss and higher luminous efficacy on the road.
After screwing in the economical LED lamp, it can still be adjusted so that it radiates evenly in the desired direction.
Energy saving, considerably longer durability and savings in maintenance costs.
LED chip: 28 x 1W High Power LEDs
Brightness: 2670 lumen (equivalent to 50W NAT lamp at 6m pole height or 80W HQL / HPL lamp at 7m pole height)
Average luminous intensity 13 lux at 6m height.
Light distribution: Horizontal axis: 120°, vertical axis: 60°.
Base type: E40
Light colour: 3000K (warm white) or 4000K (neutral white)
Light output ratio: 95 Lm/W
Service life: Approx. 40,000 h = approx. 10 years
Power consumption: max. 29 Watt (LEDs: 28 Watt)
Voltage: 85 - 265VAC (universal) 50Hz - 60Hz
Dimensions: Length 275 mm, Ø 92 mm
Rotatable: 360° (after screwing into the socket)
Housing: aluminium profile heat sink, PC
Protection class: IP54
For professional use only
Minimum order quantity: 2 pieces
| Energieklasse (EEK): | E, F |
|---|---|
| Lampenfassung: | E40 |
| Leuchtmittel Typ: | LED |
| Lichtstrom Lumen: | 2620 |
| Lichtverteilung Winkel: | 120x60° |
| Optik / Linsenabstrahlung: | Straßenoptik |
| Schutzklasse: | IP54 |
| Systemspannung: | 230V |
| Watt Leuchtmittel : | 28W |
Login
Skip product gallery
€9.52*
Zubehörempfehlung
Z-FASE40P
Height: 77mmDiameter front 70 mm, rear 53 mmWith small sheet mounting plate for quicker and easier assembly.Mounting hole spacing 56.5mmMax voltage: 500V / 18APulse voltage 5 kVMax. Temperature 270° CConnection: screw terminals 0.5 - 1 mm²
* Preise inkl. MwSt. zzgl. Versandkosten