Products description
Solar powered PV isle energy system for generating of 230 V AC voltage.
For use in regions without electricity.
To supply electrical energy even at night or under cloudy sky, this system has an energy store with batteries.
This system can be linked with the 230V power grid or with an auxilliary Diesel generator for automatic backup.
Inverter:
Combined power supply for photovoltaic, mains and battery operation.
The battery charging can be done via the solar modules or via the power grid or an auxilliary diesel generator.
MPPT Maximum power point tracking adjusts the solar module voltage to the battery voltage for for up to 30% more power from the solar modules.
Overload and deep discharge protection for the batteries.
Output voltage: 230V
Single Phase: 50 -60Hz, auto-sensing
Pure sine wave
Maximum consumer load capacity: 3000VA / 2400W
Short-term peak load: 3500 W (starting current for motors)
Efficiency: 98%
Short circuit protection and overload cut-off.
Standby power consumption only 2W
Temperature range: 0 - 55°C
Housing: Aluminum
Dimensions: 460mm x 300 x 120mm
Energy storage:
Solar batteries AGM longlife.
Capacity: 7.2 kWh
System voltage: 48V
Battery backup time: 3.5 hours at 2000 watts of continuous consumption with fully charged batteries,
(or 24 hours at 300W).
The higher the consumption, the shorter will be the backup time.
Continuous operation: 100W - 300W (average sampling day and night, depending on the weather, sun and region)
On request, the energy store is also available in smaller stages to reduce costs.
Solar panels:
Total module power: 1400 watts peak at sunshine
Monocrystalline solar modules,
Panel power: 330Wp
Efficiency: 19%
Sealed and resistant to thunderstorm or hail.
Life expectancy: approx. 25 years.
The high-quality solar cell technology has a high degree of efficiency and allows charging also at cloudy sky.
The required area for mounting the solar modules is about 6.6 square meters (e.g., 2m * 3.3m).
The system is delivered ready for connection and consists of the following components:
4 solar modules,
1 inverter for wall mounting
4 solar batteries
Cables and terminals.
Assembly Instructions
The inverter must be installed in the house or in a weatherproof housing (housing not included in the scope of supply).
This system is also ideal for areas with frequently power shortages.
The batteries should be installed in a cool place or a dry outdoor casing (casing is not included in this product set)
