LED Solar Light with pole 4m for Pathway Motion Sensor 3000K

Robust photovoltaic street light with LED lamp and smart motion sensor - no power connection required.

Operational reliability in winter with performance for safe lighting on low-light days with increased battery capacity and larger PV module for countries with average sunlight such as Germany or Central Europe.

High brightness through state-of-the-art SMD LED in combination with electronic 12V-60V DC PWM driver. The brightness is comparable to an 80W mercury vapor lamp or 50W sodium vapor lamp. Intelligent microprocessor system control. Design, manufacturing, and quality management in Germany. The solar light is maintenance-free. All brackets and fasteners are hot-dip galvanized (optional painting upon request). The screws are made of stainless steel, rust-free.

General Technical Data:

Illuminated Area: Approx. 20 x 5 m
Recommended Pole Distance: Approx. 15-20 meters
Ambient Temperature: -20°C ~ +50°C (extension -35°C ~ +65°C available on request)

Protection Class: III Extra-low voltage

Certification Marks: CE, RoHS, WEEE 20-year availability guarantee for spare parts.

Luminaire Head Specification: Robust LED luminaire head made of die-cast aluminum

LED Lamp: SMD Chipset

LED Power: 15W

Light Color: 3000K warm white No UV radiation for reduced insect attraction

LED Efficiency: > 145 lm/W

Luminaire Efficiency: > 130 lm/W

Luminous Flux: 2300 lm

Central Illuminance: >28 lux (4m height)

Average Illuminance: >16 lux (4m)

LED Lifespan: approx. 80,000 hours Protection Rating: IP65 (water- and storm-proof)

Warranty: 5 years

Luminaire Control: Smart microprocessor control with wireless programming capability. Readout of the current operating status with storage of measurement data of all components for the last few days.

Automatic switching on at sunset and switching off at sunrise. (Switching level adjustable) The light can be set to operate at a power of, for example, 10-30%, throughout the entire night (from dusk) or in 5 time blocks (1-15 hours).

If a person enters the detection range of the motion sensor (approx. 15 m, 360°), the LED lamp will switch to 50-100% power, depending on the setting, for 1-10 minutes. Due to the long winter months, the total of the time blocks together should be at least 15 hours. The LED turns on according to the set night light detection threshold (voltage drop on the PV module). The light switches off at sunrise also according to the set night light detection threshold (voltage rise on the PV module, the time blocks are ended).

Example 1: From dusk for 4 hours with 10% basic lighting, 100% when motion sensor is activated, remaining night (approx. 10 hours) 0% basic lighting and 70% on motion sensor activation.

Example 2: 4 hours 10% basic lighting, 100% when motion sensor is triggered, then 6 hours only 50% with motion sensor contact, the rest of the night again 4 hours 10% basic lighting, 100% when motion sensor is triggered

Example 3: The entire night (15 hours) at 10%, 100% with motion sensor contact

Additionally, the charge controller is equipped with a Smart Power function that allows automatic dimming at night depending on the battery charge level. If the battery voltage drops below 50%, the lamp is automatically dimmed to 50%, this process continues in descending steps until the deep discharge protection activates. This setting allows safe operation even on the low-light days in winter. The charge controller settings are preconfigured by us according to the customer’s wishes. If you want to change settings, you need the remote control S-SOLS29-5.

We are happy to assist you in deciding on the right presettings.

All functions are pre-programmed by us free of charge according to the project and customer requirements, so that the luminaire is ready for operation immediately after assembly. Temperature-optimized battery charging and maintenance charging to protect the batteries. Overvoltage and deep discharge protection for the battery. Reverse polarity and short-circuit protection.

Additional fuse Protection class: IP66

Warranty: 5 years

Motion detector: Sensor Microwave Detection angle 360° Range up to 12m

The motion detector is not visible, located behind the glass in the LED housing. By using HF sensors in the motion detector, we achieve a wide detection range while simultaneously reducing false alarms.

Additionally, the motion detector is insensitive to fluctuations in ambient temperature compared to PIR motion detectors.

Solar module specifications: Monocrystalline PERC cells with very high efficiency and tempered ESG solar glass, hail-resistant.Monocrystalline PERC cells with very high efficiency and hardened ESG solar glass, hail-resistant. This high-quality module technology ensures charging even under cloudy skies. Due to the small cell gaps and thinner busbar design, we achieve solid energy generation and excellent performance in low-light conditions.

Power: 120Wp

Cell type: 166mm x 166mm with 9 multi-busbars, less resistance, and more stability

Bypass diode: 2 pcs.

Junction box: IP68

Efficiency: up to 22.9%

Lifespan: approx. 25 years Performance guarantee * Plus tolerance guarantee (+3%) 25 years 80% / 10 years 90% * except in the case of mechanical impact TÜV certified according to standards IEC61215 and IEC61730

Battery Storage:

Battery: Lithium iron phosphate (LiFePo4) block battery for installation in the mast 12.8V, maintenance-free, long-life, for solar cycle operation Lifespan approx. 7 - 10 years / 20°C

Function also at low or high temperatures (-20° to +60°) Battery Management System

Battery management system with dual temperature monitoring for optimal charging Protection against deep discharge and overcharging Tested according to UN38.3 Autonomous operating time under cloudy weather (with fully charged battery):

Winter: 50 - 80 hours (up to 7 days)

The integrated emergency lighting function ensures illumination even with low battery charge during very long periods of bad weather, but with reduced brightness. The batteries are located in the mast, behind the lockable door.

Mast: Reinforced solar mast, hot-dip galvanized. (Powder coating in DB or RAL color on request possible)

Visible height: 4 m

Ground section: 80 cm for concreting (also available in 6 m - 8 m height on request)

For easier installation, we also offer installation sleeves into which the mast can be inserted. Lockable mast door with triangular key lock, for easy access to the control system and battery. (Security lock available at extra cost)

Delivery in 3 pre-assembled components:

1: LED lamp head including mast mounting and connection cable

2: PV module including mast mounting and connection cable

3: Solar mast with pre-assembled control unit and LiFePo4 battery Pictured assembly instructions in German or English. All components are pre-wired and prepared for quick assembly.

If you have any questions about the product or assembly, please contact us.