Z-LED-T5-02B
Powerful LED lamp as replacement against fluorescent tubes - bright LED tube.Very bright by high flux SMD LED.Advantages of LED tube lamps against the old fluorescent tubes: Low power consumption, very long life time, high brightness, contains no toxic elements. LED tubes are maintenance free, wich results in a fast amortisation. This tube replaces a fluorescent tube TL 10W T5 Rated life: 25000 h - more than 11 years. Luminous flux: 600 lm Light colour: 4000K pure white 840 ( at 50 pcs. on request with 3000K warm white or 6500K daylight) Wide beam spread: 160° Matted diffusor (on request in clear available) Operating voltage: 12V and 24V DC (10V - 28V) - not for mains voltage ! The electrical connection is made at one end of the tube. The other end is bridged. Reverse polarity protected: +- can be reversed Power: 5 watt Easy exchange at lighting fixtures with magnetic ballast. Only the ignitor has to be removed. Than the old tube has to be taken out and replaced by the new LED tube.Not suitable for fixtures with electronic ballast !Socket: T8, G13 - like standard fluorescent tubes. Material: aluminium / polycarbonate Diameter: 22 mm Standards: TÜV, CE, EMC, ETL, SAA, GS, FCC und RoHS, CEI, EN 55015:2013, EN 61000-3-2:2014, EN 61000-3-3:2013, EN 61547:2009, EN 62776:2015, EN 62471:2008, EN 62493:2015, EN 45545 ( R24) fire protection Sale to trade or industry only. Installation may only be carried out by a qualified electrician.
Z-LED-T8-36B.4
Betriebsspannung:
230V 50-100Hz
|
Modell:
120cm
|
Lichtfarbe:
4000K
Bright LED lamp as a fluorescent tube replacement with high efficiency. This bright LED tube achieves the same brightness as the previous T8 fluorescent tubes. Advantages of LED tube lamps compared to the old fluorescent tubes are the low power consumption, very long burning time, high luminous efficacy and the fact that no toxic and environmentally harmful gases, such as mercury vapour, are needed in the production of the LED fluorescent tube. LED tubes are also virtually maintenance-free, which reduces amortisation costs and maintenance costs.About 8.5 years, during which you save a lot of electricity and do not need to change lamps. Annual electricity cost saving 96kW at 12 hrs. daily / 0,16 Eur = 15,42 Euro per tube. LED tube 120cm ( 342 LED) replaces TL 36W T8, Luminous flux: 2160 lm Light colour: 4000K white 840 (on special order from 5 pcs. also 6000K daylight) Wide beam angle: 180 deg Lifetime 35000 hrs Tube: Frosted (on special request also available clear) Operating voltage: 85V - 265V AC Frequenz: 50Hz ... 100Hz Power consumption: 18 Watt Base: T8, G13 - like standard fluorescent lamps Material: aluminium / polycarbonate Diameter: 28 mm Approvals: TÜV, CE, EMC and RoHS, CEI EN 62776, EN 45545 ( R24) fire protection Quick replacement for luminaires with magnetic ballast (CCG or CCG). Only the starter has to be replaced by a starter bridge, then simply insert the LED tube instead of the old fluorescent tube.If there is an ECG in the luminaire, it must be disconnected. Installation should only be carried out by a qualified electrician. LED fluorescent tubes can only be shipped as bulky goods - the surcharge is 17 euros once or by collection.
Z-LED-T8-24
Bright LED lamp as a fluorescent tube replacement with high efficiency.This bright LED tube achieves the same brightness as the previous T8 fluorescent tubes.The advantages of the LED tube over the old fluorescent tubes are the low power consumption,very long burning time and high luminous efficacy.This LED fluorescent tube can be operated directly on a 12V battery without a ballast.LED tubes are also practically maintenance-free, which reduces amortisation time and maintenance costs.LED tube 90cm ( SMD LED) replaces TL 30W T8,service life: 25000 hours - equivalent to around 20 years, during which you save a lot of electricity and do notand do not have to change lamps.Luminous flux: 1560 lmLight colour: 4000K white (3000K or 6000K daylight also available on special order from 50 units)Colour rendering: Ra > 80Wide beam angle: 180°Power consumption: 14 wattsOperating voltage: 12V and 24V DC (10V - 28V) - not for mains voltage!Current consumption: Approx. 633 mA @ 24VThe electrical connection is made at one end of the tube. The other end is bridged.Reverse polarity protected: +- can be reversedBase: T8, G13 - like standard fluorescent lampsMaterial: Aluminium and cover made of milky polycarbonate.Approvals: TÜV, CE, EMC, ETL, SAA, GS, FCC and RoHS, CEI, EN 55015:2013, EN 61000-3-2:2014, EN 61000-3-3:2013, EN 61547:2009, EN 62776:2015, EN 62471:2008, EN 62493:2015Sale to trade or industry only. Installation may only be carried out by a qualified electrician.