PV Solar Advertising-Board Lighting Bar 3m

Order code: LA-1061

1775.48 je Stk. .   incl. VAT plus Shipping cost

Availability: Production in our facilities

Select from the following versions:
  

Quantity

With a long power LED bar, solar panel, battery and automatic light controller. Up to 300cm billboard width.
Manufacturer: GEO-Technik

Details

With automatic lighting control, programmable, even with midnight break.
High-intensity LED light strip 300cm long which runs above the entire width of the sign.
Fastened with 2 arms 20 - 80 cm in front of the board.
On request, we also manufacture in other lengths.
The light strip is attached to the upper edge of the sign with the included small arms.
Solar modules and battery box are usually attached to the back of the billboard.
For fixing horizontal struts must be present behind the panel, or a lattice mast, etc.
Alternatively, these components may also be attached to another mast, floor or adjacent building.
We are happy to put together an individual set for you.

General technical data:
Illuminated area: width about 3 meters, height 50 - 250cm
Ambient temperature: -20 ° C ~ + 55 ° C
Protection class: III Protective extra-low voltage
Test mark: CE, RoHS, WEEE
20-year availability guarantee for replacement parts.

Luminaire strip Specification:
Strip made of aluminum profile, natural, 300cm
LED: SMD chipset
LED power: 18W
Energy efficiency class A +++
Light color 4000K neutral white (on special order also 3000K warm white or 5000K cool white).
No UV radiation for reduced insect attractiveness
Luminous efficiency:> 100 lm / w
Luminous flux lumen: 1800 Lm
LED life about 40,000 hours
Protection class: IP65

Light Control:
Smart microprocessor control with infrared programming option.
Automatic switch-on at sunset and switch-off at sunrise. (Switching level adjustable)
Adjustable interruption during late night and back on in the morning to extend the duration in bad weather.

The charge controller settings are preset by us according to customer requirements.
If you want to change settings, you need the remote control S-SOLS29.
We will gladly help you to decide on the right presettings.
All functions are preprogrammed by us free of charge, depending on the project and customer request, so that the luminaire is ready for operation immediately after assembly.
Temperature-optimized battery charging and trickle charging to conserve batteries.
Overvoltage and deep discharge protection for battery.
Reverse polarity and short circuit protection.
Additional fuse
Protection class: IP66
5 years warranty

Solar module specifications:
Monocrystalline silicon with very high efficiency
tempered protective glass, hailproof
This high quality module technology also ensures charge in overcast skies.
Efficiency:> 16%
Power: 2x 80Wp (2x 150Wp at the 12h version)
Life expectancy: approx. 25 years
Dimensions: 8h: 2x 1000 x 510, thickness 35mm / 12h: 2x 1460 x 664 x 35mm

Battery storage:
Battery Type: Lead Gel 12V,
maintenance-free, longlife.
For solar cycle operation
Lifetime approx. 6 - 10 years / 20 ° C
Function even at low temperatures.
For an extra charge: Lithium-ion LiFePo4 battery
Depending on the desired lighting duration, or for higher reliability in autumn or winter, we offer this lighting in the versions:
8h) 8 hours nocturnal illumination after a sunny day (33 hours autarkic operating time)
12h) 12 hours of nocturnal illumination (40 hours max continuous operation with fully charged battery).

Battery box:
Robust plastic housing for installation in the floor or wall mounting for holding the battery and the controller.
Incl. Cable and mounting material.
Dimensions: 390 x 390 x 400mm

Wall bracket:
2 pcs. Outrigger made of steel, length 100cm, color silver grey